Go to homepage
Contact

Need advice? We will be happy to advise you.

Contact

Need advice? We will be happy to advise you.

Contact

Need advice? We will be happy to advise you.

Contact

Need advice? We will be happy to advise you.

Contact

TP4 ALL stabicol

Ready-mixed tile adhesives

How much of this do I need?

Adhesive for floor and wall tiles.

Characteristic properties of the product

  • Ready-to-use.
  • Can be applied without using a primer.
  • Suitable for virtually all tile types.
  • Also suitable for (thin) XL and XXL large format and natural stone tiles.
  • Remains elastic and can be used on underfloor heating.
  • Layer thickness up to 15mm.
  • Floor and wall.
  • Indoor.
  • Classified according to EN 12004: D2
EC2plus

Applications

TP4 ALL stabicol is suitable interior walls and floors. As a tile adhesive, it is especially suitable for laying all ceramic wall and floor tiles, natural stone (provided it is not sensitive to staining), (glass) mosaic tiles and facing bricks. Suitable for use as an adhesive with SC omnimat and WD omnimat. It is a tile adhesive with lasting elasticity, which enables it to withstand any surface deformations. It can be applied flexibly, is ready to use and dries well. It can be used in kitchens, toilets, living rooms, bathrooms and showers. It is equally suitable for houses, apartment blocks and functional buildings.

USP02 USP14 USP16E USP31

Getting started with TP4 ALL stabicol

Certificates and documents

Download the documents available from this specific product here.

Aanvullende documenten

Can't find the right certificate?

Contact us

Videos

Here you will find the videos available for this specific product. If you didn't find what you were looking for, check out our YouTube channel.

https://youtube.com/shorts/SjcXZYAVOC0?feature=share

Most frequently combined

 products

Cross Sellings EN

SILICONE omnikit
SILICONE omnikit
Neutral, acid-free and mould-resistant silicone mastic.
TP omnibind
TP omnibind
Adhesion-enhancing primer.
WD FLEX R omnifill
WD FLEX R omnifill
Fast curing and water-resistant grout for joints from 2 up to 15 mm.
W100 R omnimix
W100 R omnimix
Multi-purpose levelling mortar for walls, fast-hardening, mechanical application.
90W LIGHT omnimix
90W LIGHT omnimix
Lightweight levelling mortar for mechanical application on walls.
FP30
FP30
Quick-drying primer.

Let us help you out

Which glue comb is best to use?

The choice of the right teeth depends on a number of factors; 

  •  the type of tile adhesive (paste or powder), 
  • the 'buttering-floating' method is used, and 
  • the application (wall or floor), 
  • the flatness of the substrate and the flatness of the tile. 
Tip: By regularly removing a tile from the adhesive bed, you can see what the adhesive contact surface looks like and whether this is sufficient. 
For large format tiles >60x60 cm. It is in any case important that the surface is flat. If you need to eliminate large level differences in the surface, you can first level the surface, or you can use a thick-bed mortar with a round-toothed adhesive comb. 
Read some guidelines regarding glue combs on the next page.

How long does the mixed glue last in the tub?

This is the pot life, which is usually between 2 and 4 hours. Attention! With fast-hardening adhesives this is only 20-30 minutes.

When can I walk on the tiles?

This can be done (carefully) after at least 24 hours. With fast-setting adhesives, this can be done after just a few hours.

Need any help?

We will be happy to advise you.