PL85 omnicem
Powder tile adhesive
Flexible all-round powder tile adhesive.
Characteristic product properties
- For all ceramic floor and wall tiles, calibrated natural stone, composite screed tiles and (glass) mosaic tiles.
- Suitable for virtually all critical substrates, such as old tiling, concrete and areas including swimming pools and patios.
- Layer thickness: up to 15 mm.
- Can be applied to walls and floors.
- For indoor and outdoor use.
- Classified in compliance with EN 12004: C2TE S1.
Applications
For the bonding of every type of ceramic floor and wall tiles, even those with a porosity of < 0.2%, calibrated natural stone, cement-composite tiles and (glass) mosaics. Use the white quality for stain-sensitive natural stone. Good levelling-off capability, which is especially important when working with large-sized tiles or on substrates that are not entirely flat. By making the adhesive with slightly more water, it becomes a flow bed adhesive, providing a 100% contact surface for larger floor tiles. Can be used indoors and outdoors without any problem. Applicable for bonding on both ‘non-working’ substrates and most ‘working’ substrates.
Getting started with PL85 omnicem
Certificates and documents
Download the documents available from this specific product here.
Additional documents
Can't find the right certificate?
Contact usVideos
Here you will find the videos available for this specific product. If you didn't find what you were looking for, check out our YouTube channel.
Cross Sellings EN
Let us help you out
Which glue comb is best to use?
The choice of the right teeth depends on a number of factors;
- the type of tile adhesive (paste or powder),
- the 'buttering-floating' method is used, and
- the application (wall or floor),
- the flatness of the substrate and the flatness of the tile.
How long does the mixed glue last in the tub?
This is the pot life, which is usually between 2 and 4 hours. Attention! With fast-hardening adhesives this is only 20-30 minutes.
When can I walk on the tiles?
This can be done (carefully) after at least 24 hours. With fast-setting adhesives, this can be done after just a few hours.