PL50 omnicem

Powder tile adhesive

Getting started with PL50 omnicem

Certificates and documents

Download the documents available from this specific product here.

Can't find the right certificate?

Contact us

Videos

Here you will find the videos available for this specific product. If you didn't find what you were looking for, check out our YouTube channel.

Cross Sellings EN

142 omnifill
Water-resistant grouting mortar for joints from 2 to 10 mm.
SILICONE omnikit
Neutral, acid-free and mould-resistant silicone mastic.
TP omnibind
Adhesion-enhancing primer.
W100 R omnimix
Multi-purpose levelling mortar for walls, fast-hardening, mechanical application.
90W LIGHT omnimix
Lightweight levelling mortar for mechanical application on walls.
FP30
Quick-drying primer.

Let us help you out

Which glue comb is best to use?

The choice of the right teeth depends on a number of factors; 

  •  the type of tile adhesive (paste or powder), 
  • the 'buttering-floating' method is used, and 
  • the application (wall or floor), 
  • the flatness of the substrate and the flatness of the tile. 
Tip: By regularly removing a tile from the adhesive bed, you can see what the adhesive contact surface looks like and whether this is sufficient. 
For large format tiles >60x60 cm. It is in any case important that the surface is flat. If you need to eliminate large level differences in the surface, you can first level the surface, or you can use a thick-bed mortar with a round-toothed adhesive comb. 
Read some guidelines regarding glue combs on the next page.

How long does the mixed glue last in the tub?

This is the pot life, which is usually between 2 and 4 hours. Attention! With fast-hardening adhesives this is only 20-30 minutes.

When can I walk on the tiles?

This can be done (carefully) after at least 24 hours. With fast-setting adhesives, this can be done after just a few hours.

Need any help?

We will be happy to advise you.