Go to homepage
Contact

Need advice? We will be happy to advise you.

Contact

Need advice? We will be happy to advise you.

Contact

Need advice? We will be happy to advise you.

Contact

Need advice? We will be happy to advise you.

Contact

E FLEX R omnicem

Powder tile adhesive

How much of this do I need?

Flexible and fast-hardening powder tile adhesive.

Characteristic product properties

  • Suitable for use as an adhesive on most types of tile.
  • Ideal if you need a slightly thicker adhesive.
  • Layer thickness: up to 15 mm.
  • Can be applied to walls and floors.
  • Indoor and outdoor.
  • Classified in compliance with EN 12004: C2F S1.
EC1plus Less dust

Applications

For laying all ceramic floor and wall tiles, calibrated natural stone, composite cement tiles, (glass) mosaic tiles and stone strips. Use white adhesive for types of natural stone that are sensitive to staining. Excellent levelling capacity, which is especially important when laying large format tiles and on surfaces that are not entirely level. The mortar can be used without any problems inside and outside. Can be used as an adhesive on surfaces that are not placed under any kind of strain, as well as most surfaces that are subjected to more wear and tear. Public spaces, shops (rapid approval required) and outdoor tiling are a few examples of where it can be used.

USP11 USP08 USP21_15 USP15_5 USP12

Getting started with E FLEX R omnicem

Certificates and documents

Download the documents available from this specific product here.

Additional documents

Can't find the right certificate?

Contact us

Videos

Here you will find the videos available for this specific product. If you didn't find what you were looking for, check out our YouTube channel.

Most frequently combined

 products

Cross Sellings EN

SILICONE omnikit
SILICONE omnikit
Neutral, acid-free and mould-resistant silicone mastic.
WD FLEX R omnifill
WD FLEX R omnifill
Fast curing and water-resistant grout for joints from 2 up to 15 mm.
ZR omnibind
ZR omnibind
Light green, fast-drying grip primer.
W100 R omnimix
W100 R omnimix
Multi-purpose levelling mortar for walls, fast-hardening, mechanical application.
90W LIGHT omnimix
90W LIGHT omnimix
Lightweight levelling mortar for mechanical application on walls.
FP30
FP30
Quick-drying primer.

Let us help you out

Which glue comb is best to use?

The choice of the right teeth depends on a number of factors; 

  •  the type of tile adhesive (paste or powder), 
  • the 'buttering-floating' method is used, and 
  • the application (wall or floor), 
  • the flatness of the substrate and the flatness of the tile. 
Tip: By regularly removing a tile from the adhesive bed, you can see what the adhesive contact surface looks like and whether this is sufficient. 
For large format tiles >60x60 cm. It is in any case important that the surface is flat. If you need to eliminate large level differences in the surface, you can first level the surface, or you can use a thick-bed mortar with a round-toothed adhesive comb. 
Read some guidelines regarding glue combs on the next page.

How long does the mixed glue last in the tub?

This is the pot life, which is usually between 2 and 4 hours. Attention! With fast-hardening adhesives this is only 20-30 minutes.

When can I walk on the tiles?

This can be done (carefully) after at least 24 hours. With fast-setting adhesives, this can be done after just a few hours.

Need any help?

We will be happy to advise you.