DB FLEX omnicem
Bedding mortars
Mortar for thick flexible layers.
Characteristic product properties
- For (uncalibrated) natural stone and (large format) ceramic tiles.
- On underfloor heating, concrete and old tiles.
- Layer thickness: up to 40 mm.
- Can also be used in the traditional way.
- Indoor and outdoor.
- Classified in compliance with EN 12004: C2.
Applications
For laying all ceramic floor and wall tiles, including those with a lower porosity than 0.2 %, natural stone, composite cement tiles and brick strips. For applying thicker layers of adhesive, wherever it is not possible to use paste or power adhesives, such as uneven wall surfaces or uncalibrated natural stone
(different thicknesses). The mortar can be used without any problems inside and outside. It can be used as an adhesive on “stress bearing” and “non-stress bearing” surfaces. Especially suitable for laying glass construction blocks. Examples of applications: damp places, doorsteps, shopping centres, public and industrial spaces, façades and patios.
Getting started with DB FLEX omnicem
Certificates and documents
Download the documents available from this specific product here.
Additional documents
Can't find the right certificate?
Contact usVideos
Here you will find the videos available for this specific product. If you didn't find what you were looking for, check out our YouTube channel.
Cross Sellings EN
Let us help you out
Which glue comb is best to use?
The choice of the right teeth depends on a number of factors;
- the type of tile adhesive (paste or powder),
- the 'buttering-floating' method is used, and
- the application (wall or floor),
- the flatness of the substrate and the flatness of the tile.
How long does the mixed glue last in the tub?
This is the pot life, which is usually between 2 and 4 hours. Attention! With fast-hardening adhesives this is only 20-30 minutes.
When can I walk on the tiles?
This can be done (carefully) after at least 24 hours. With fast-setting adhesives, this can be done after just a few hours.