Go to homepage
Contact

Need advice? We will be happy to advise you.

Contact

Need advice? We will be happy to advise you.

Contact

Need advice? We will be happy to advise you.

Contact

Need advice? We will be happy to advise you.

Contact

DB FLEX R omnicem

Bedding mortars

How much of this do I need?

Flexible, fast-hardening mortar for applying thick layers.

Characteristic product properties

  • Suitable for rapid delivery and use.
  • For (uncalibrated) natural stone and (large format) ceramic tiles.
  • On underfloor heating, concrete and old tiles.
  • Can also be used in the traditional way.
  • Layer thickness: up to 40 mm.
  • Indoor and outdoor.
  • Classified in compliance with EN 12004: C2F.
EC1plus Less dust

Applications

For all ceramic floor and wall tiles, including tiles with under 0.2% porosity, natural stone tiles, composite marble tiles, composite cement tiles and bricks with a short delivery time. Suitable for application in thicker layers, wherever it is not possible to use paste or powder tile adhesives, such as non-level wall surfaces or uncalibrated natural stone (different thicknesses). The mortar is suitable for indoor and outdoor use, without any problems. It can be used as an adhesive on “stress bearing” and “non-stress bearing” surfaces. Suitable for laying glass construction blocks. Examples of applications: damp places, doorsteps, shopping centres, public and industrial spaces, façades and patios. If a special method is used to apply the adhesive, it is also suitable for making repairs under water!

USP11_2-12 USP08 USP21_40 USP16B USP22

Getting started with DB FLEX R omnicem

Certificates and documents

Download the documents available from this specific product here.

Additional documents

Can't find the right certificate?

Contact us

Videos

Here you will find the videos available for this specific product. If you didn't find what you were looking for, check out our YouTube channel.

Most frequently combined

 products

Skip product gallery

Cross Sellings EN

SILICONE omnikit
SILICONE omnikit
Neutral, acid-free and mould-resistant silicone mastic.
TP omnibind
TP omnibind
Adhesion-enhancing primer.
WD FLEX R omnifill
WD FLEX R omnifill
Fast curing and water-resistant grout for joints from 2 up to 15 mm.
Skip product gallery
W100 R omnimix
W100 R omnimix
Multi-purpose levelling mortar for walls, fast-hardening, mechanical application.
90W LIGHT omnimix
90W LIGHT omnimix
Lightweight levelling mortar for mechanical application on walls.
FP30
FP30
Quick-drying primer.

Let us help you out

Which glue comb is best to use?

The choice of the right teeth depends on a number of factors; 

  •  the type of tile adhesive (paste or powder), 
  • the 'buttering-floating' method is used, and 
  • the application (wall or floor), 
  • the flatness of the substrate and the flatness of the tile. 
Tip: By regularly removing a tile from the adhesive bed, you can see what the adhesive contact surface looks like and whether this is sufficient. 
For large format tiles >60x60 cm. It is in any case important that the surface is flat. If you need to eliminate large level differences in the surface, you can first level the surface, or you can use a thick-bed mortar with a round-toothed adhesive comb. 
Read some guidelines regarding glue combs on the next page.

How long does the mixed glue last in the tub?

This is the pot life, which is usually between 2 and 4 hours. Attention! With fast-hardening adhesives this is only 20-30 minutes.

When can I walk on the tiles?

This can be done (carefully) after at least 24 hours. With fast-setting adhesives, this can be done after just a few hours.

Need any help?

We will be happy to advise you.